Energy Efficient Solutions - Radiant Barrier, Spray Foam Kits, Solar Attic Fans and more

toll free: (877) 464-5828  

Call Energy Efficient Solutions LLC local: (972) 499-4550  

menu menu


We are your source for energy efficient products and information.

Single Component Tank Foam


Foam Sealants

*Tank Only version does not inlcude the hose.

1040 tax credit

This product may qualify for 10% in energy tax credits.

  • ASTM E84/UL 723

  • Simple, Fast, and Efficient

  • Spray Foam Sealant

  • R-5 per inch

  • 36,108 ft at 1/4 inch bead

  • Start, Stop, and Store

Buy Now - $209.00
$199.00 / kit


HANDI-FOAM® polyurethane foam sealants are moisture cured sealants designed to completely fill and seal small gaps, cracks, and voids up to about 3 inches.  These polyurethane foam sealants have excellent adhesion and expansion characteristics ensuring a complete and permanent air tight seal.  This spray foam tank insulation is dispensed through a hose and wand for control and ease of use.

Handi-Foam® Sealant assists in preventing air infiltration and helps to reduce heating and cooling costs.  In addition the Handi-Foam™ Polyurethane Foam Sealant helps to prevent moisture™ infiltration that happens through air leakage, therefore helping to reduce the possibility of water damage and mold problems.

Handi-Foam™ foam sealer kits are designed utilizing a non-flammable blowing agent to assist in the safety of the end user.  HANDI-FOAM® is committed to product stewardship and works hard to create products that contribute to healthier indoor environments.  Please see GREENGUARD® Certification for more information.


  • Hose: NOT Included (Tank Only)

  • Yield: 36,108 ft at 1/4 inch bead

  • Size: 260 oz. (16 lbs)

  • Tack Free: Approx. 5 minutes

  • Cuttable: 1 hr.

  • Full Cure Time: 12-24 hrs.

  • Type: Polyurethane Gun Foam

  • Fire Rating: Flame Spread 5, Smoke Development 20

  • Density: 1.30 lbs/ft³

  • R-Value: 5 per inch

  • Closed Cell: Yes, 95%

  • Air Barrier: <0.00028 cfm/ft² @ 75 PA (ASTM E2178)

  • MFTR Part No: P11041

  • Shipping Weight: 24 lbs

Technical Information:

  Operating Instructions:

  Technical Data Sheet

  Safety Data Sheet

Safety Equipment:

  Safety Googles Gloves Long Sleeves

Installation Tips:

  • Temperature: Polyurethane sealant spray products are temperature sensitive.  You can spray this foam in colder outdoor temperatures, but the key is to keep the core temperature of the can within the proper range of 65-80°F.

  • Adjustable Flow: This kit comes with two application tips of different lengths. Using the longer tip will result in a slower flow rate.

  • Larger Voids: If sealing voids 3" or larger, moisten with a spray bottle before foaming.

  • Safety Considerations: Our Safety Kit includes a tyvek suit with hood, respirator, goggles, and 2 pairs of nitrile gloves.

  • Clean Up: You can clean up uncured foam with Handi-Cleaner.  Clean gun tip after every use.  Clean basket whenever changing cans.  Once foam is fully cured, you will have to remove it by mechanical means.

  • Optional Dispensing Tool: We sell an adaptor (pictured below) to connect this tank to any of our dispensing tools.  With this tool, you can fine tune and control the flow of foam down to a small bead.

tank with gun

(Pictured with Gun Adaptor and HT500 Dispensing Tool)

Optional Accessories:

You may be interested in some of these accessories.

Spray Foam Safety Kit

Full Safety Kit
Spray Foam Cleaner
Handi-Cleaner (10 oz)

Gloves (2 pair)
Tank to Gun Adaptor

Tank Adaptor
Consumer Grade Gun

Consumer Grade Gun
Contractor Grade Gun

Contractor Grade Gun

Looking for two-component spray foam kits?

Note: Use this polyurethane foam sealant only according to the manufacturer's written instructions.

Privacy Policy | Terms and Conditions | Credits | Sitemap