• Temperature: Spray foam products are temperature sensitive.  You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.

• Change Nozzles: It is important to change the nozzle after you stop spraying for more then 30 seconds.  Failure to change nozzles may result in damage to the spray gun.

• Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times.  As soon as you are done spraying, remove the nozzle and drop it in a can of acetone.  You can also use our Handi-Cleaner to clean out uncured foam.

• Safety Considerations: Our Safety Kit includes a tyvek suit with hood, respirator, goggles, and 2 pairs of gloves.

• Application: Use a slow, steady, smooth motion to spray a continuous layer when applying the foam.  Spray what appears to be just under 1/4" thickness and it will expand and cure to roughly 1 inch.  Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.

• Clean Up: You can clean up uncured foam with Handi-Cleaner.  Once foam is fully cured, you will have to remove it by mechanical means.

• More: Download the full Operating Instructions (pdf)

While each kit come with everything you need to spray foam, you may be interested in some of these optional accessories.

Cone Nozzles (8 Pack) $16.25	Fan Nozzles (8 Pack) $16.25	Replacement Hose (15ft) $85.00
Full Safety Kit $39.95	Respirator $29.95	Tyvek Coveralls $9.95
Safety Goggles $4.79	Gloves (2 pair) $1.00	Handi-Cleaner (10 oz) $10.50