Polyurethane Foam Adhesive - Gun Foam

Application: For best results as a foam adhesive, use a technique called "flashing" to adhere the foam shape to the substrate.  Apply the polyurethane glue in a zig zag pattern onto the back of the foam shape to be adhered and then stick (flash) to the substrate and quickly remove.  Allow the adhesive to set-up for 1 minute.  Reapply the foam shape and hold in place.

Temperature: Spray foam products are temperature sensitive.  You can spray this foam in colder outdoor temperatures, the key is to keep the core temperature of the can within the optimum range of 65-80°F.

Adjustable Flow: The HT300 and HT500 guns are equipped with a regulator screw that allows you to control the flow rate and adjust the bead size.

Larger Voids: If sealing voids 3" or larger, moisten with a spray bottle before foaming.

Safety Considerations: Our Safety Kit includes a tyvek suit with hood, respirator, goggles, and 2 pairs of nitrile gloves.

Clean Up: You can clean up uncured foam with Handi-Cleaner.  Clean gun tip after every use.  Clean basket whenever changing cans.  Once foam is fully cured, you will have to remove it by mechanical means.