Foam Panel Garage Door Insulation Kits

If you have an uninsulated garage door then this retrofit insulation kit is the solution to make your garage more comfortable in both summer and winter.  The foam panels included in this kit are 54" wide x 20" tall x 1.25" thick to fit virtually all standard residential garage doors.  One kit fits single car garage doors up to 9 ft wide.  Purchase two kits for double car garage doors up to 18 ft wide.

The high quality Expanded Polystyrene (EPS) core may assist in lowering utility bills while making the garage more comfortable as a workshop.  The exposed panel face is covered by a High Impact Styrene (HIPS) laminate which enhances the appearance and provides superior durability and is easy to clean.  Insulated garage doors generally create a quieter atmosphere and operation.  Installation is typically completed in less than an hour using only a few household tools.

Installation Instructions

• 1. Measure the inside widths of your garage door panels.  Keep in mind that different panels on the same door may be different widths.
  
  
• 2. The panels in this kit are 54 inches wide.  If your door panels are less then 54 inches you will have to trim them down.  The easiest way is to use a straight edge and utility knife to cut the panel to the proper width.
  
  
• 3. (Optional) You can cut and insert excess material behind any of the vertical rails before installing the larger panels.
  
  
• 4. Insert each insulation panel behind the horizontal rails.  Each panel is kerfed (slotted) on one side to allow it to bow in one direction.  The side with slots faces the garage door while the side with the smooth plastic faces the interior of your garage.  The panel will flex enough to allow you to insert one edge, bow, and then insert the other edge.